Eliminating "Roping" Brush Marks When Painting

Eliminating Brush Strokes

To have paint lay down with out brush marks means you have to begin off with a floor that’s easy and clear. If you might be repainting trim that has brush marks already, you’ll have to sand them flat previous to beginning your doomed from the beginning.

To prep the floor begin with the mildest [highest] grit paper that may get the job carried out and work your means all the way down to extra aggressive [lower] grits if wanted. I begin with 220 grit and work down by way of 180, 150, 100 grits, as wanted. The aim right here is to sand the floor easy and flat. I sand all the floor which ensures the most effective mechanical bond for the paint to stick to.

Thinning the Paint

Bill taught me a very long time that the key high laying down oil paint is to pour the paint right into a working bucket and skinny the paint 5% with paint thinner and Penetrol.

Penetrol is an oil-based additive that helps enhance paint adhesion and move in oil-based paints, primers, and polish. When thinning the paint, totally stir the paint till you attain the right viscosity. How do you inform when it is prepared?

Here’s a tip:

Pull the paint stick out of the bucket and permit the paint to drip off onto the paint within the bucket. When the paint hits the floor and disappears again [level] into the paint – leaving a stage, easy floor – you’ve reached the right viscosity and also you’re prepared to use paint.

Pro Tip:
If the paint isn’t coming from a brand new can pressure the paint to remove particles.

Applying the Paint
Once the trim is clear, you’ve managed air mud and thinned the paint you might be prepared for the key sauce.
Apply paint to ¼ to 1/third of the comb and apply paint to the floor, guaranteeing full paint protection. Working the paint into the floor with back-and-forth strokes till it “feels even.”

Once that is full, you’re prepared for “tipping,” that is the one space that requires some talent and feels, for the paint being utilized. The “feel” portion of this course of comes from expertise and getting your reps in.
Using the tip of the bristles apply a delicate “tip-stroke,” from one finish of the board to the other finish – utilizing one steady stroke [End-to-End] if attainable. you’ll obtain higher outcomes in the event you tip in the identical route.
Once you’ve carried out this go away that space alone and don’t return over any paint that’s tacking or drying.

Lastly, sand calmly [220 grit] between coats. Following this course of will make sure that your paint mission will probably be freed from brushstrokes and look skilled.

Subscribe to Channel:

This video by A Concord Carpenter / ToolBoxBuzz was considered 54320 and favored: 1864 occasions

If you want this video, please support their channel by liking and subscribing.

Subscribe Here

Leave a Comment

Your email address will not be published. Required fields are marked *